02-03 Subaru WRX ST Suspensions XTA Coilovers
ST XTA COILOVERS
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behavior of your car can be adjusted using KW damper technology along with an adjustable aluminum uniball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with more track stability and reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminum adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
-Latest damping technology for maximum longevity
-Reduced system friction for effective damping adjustment
-Individual lowering within the TÜV-tested adjustment range
-Front and rear axle (when possible) with thread adjustment
-Galvanized coilover struts with additional coating for an optimized corrosion protection
-Complete solution with adjustable spring plate, race spring system and bumpers with dust protection
-Aluminum adjustable uniball top mounts (when possible)
-Scaled camber adjustment (optionally also caster)
-Externally adjustable damping
Front: 1.0"-2.1" / 25-55mm
Rear: 1.0"-1.8" / 25-45mm
|2006||Subaru||Impreza 2.5i||2.5l H4 EJ253||AWD, Sedan|
|2007||Subaru||Impreza 2.5i||2.5l H4 EJ253||AWD, Sedan|
|2004||Subaru||Impreza RS||2.5l H4 EJ251||AWD, Sedan|
|2005||Subaru||Impreza RS||2.5l H4 EJ253||AWD, Sedan|
|2002||Subaru||Impreza WRX||2.0l H4 EJ205||AWD, Sedan|
|2003||Subaru||Impreza WRX||2.0l H4 EJ205||AWD, Sedan|
|2004||Subaru||Impreza WRX||2.0l H4 EJ205||AWD, Sedan|
|2005||Subaru||Impreza WRX||2.0l H4 EJ205||AWD, Sedan|
|2006||Subaru||Impreza WRX||2.5l H4 EJ255||AWD, Sedan|
|2007||Subaru||Impreza WRX||2.5l H4 EJ255||AWD, Sedan|
|2006||Subaru||Impreza WRX Limited||2.5l H4 EJ255||AWD, Sedan|
|2007||Subaru||Impreza WRX Limited||2.5l H4 EJ255||AWD, Sedan|
|2004||Subaru||Impreza WRX STI||2.5l H4 EJ257||AWD, Sedan|
|2006||Subaru||Impreza WRX TR||2.5l H4 EJ255||AWD, Sedan|
|2007||Subaru||Impreza WRX TR||2.5l H4 EJ255||AWD, Sedan|
Warranty Terms and Conditions
Effective January 1, 2011. Supersedes all previous terms, policies, and agreements
KW automotive North America Inc. warranties its products to the original retail purchaser against defects in workmanship and material for the following terms from the date of purchase:
Springs, Shocks, Swaybars 2 years
Bushings, Bump stops and Ball Joints 1 year
Coilovers 5 Years
Warranty Conditions & Limitations
This warranty is NOT TRANSFERRABLE, and is limited to the United States and its holdings, Canada and Mexico. This warranty does not apply to:
Any articles not purchased through authorized KW automotive North America Inc. dealers.
Any articles that show signs of abuse, collision or improper installation.
Any parts that are installed in vehicles that are used for race purposes, operated commercially, or used in off road conditions.
Any parts that have been sold with "No Warranty" designation on the original invoice.
Any parts that have been modified or altered in any way from its original configuration.
Any parts that have been:
Used out of its published operating range or outside KW tested force ranges, i.e.
Excessively lowered or raised vehicles.
Used in conjunction with non Non-KW automotive North America Inc. approved Air Bag kits, sway bars, springs, control arms etc
KW automotive North America Inc.'s obligation is limited to repair or replacement of the defective KW automotive Inc. component only.
Warranty acceptance along with the corresponding replacement or repair of the KW automotive component is at the discretion of KW automotive North America Inc. engineering staff. KW automotive North America Inc. is not responsible for any costs associated with the removal, replacement or shipping of the defective part, and under no circumstances will be liable for any costs or consequential damages that might be incurred.
KW automotive North America Inc. is a progressive company that is continuously improving its product line. KW automotive North America Inc. reserves the right to improve any and all of our products and materials or design without obligation to incorporate these changes in previously manufactured products.
Consumer Claim Procedures
In the interest of 100% Customer Satisfaction, we request that before a warranty claim is submitted, please contact the KW automotive Tech & Customer Service department to accurately diagnose the problem. This will ensure quick handling and resolution of your issue.
To process a valid warranty claim, contact the original place of purchase of your KW automotive North America Inc. part along with the original receipt for a determination of claim. If the product cannot be returned to the original place of purchase, please call KW automotive North America Inc by phone to request a Return Material Authorization number or RMA# and a tech sheet (if applicable).
Send the defective unit shipping prepaid along with the following documents:
Return Material Authorization number or RMA#
A copy of your original invoice
A copy of the completed brand specific tech sheet
Copy of the Vehicle's Registration certificate
IMPORTANT: Please clearly mark the package with the assigned RMA# for quick handling. KW will refuse unmarked shipments, or any shipments that are not prepaid. Once received, KW automotive North America Inc will verify warranty coverage and will repair or replace the unit at our discretion, and shipped back to you UPS Collect.
Non-Warranty Eligible Goods - End User
If a part is returned for warranty and is found to be not eligible for warranty, the customer will be given the following options:
A quote to repair or replace the goods will be presented. If accepted the goods will be sent back on the customer by their preferred method of shipping, or UPS Collect.
The goods will be disposed of at the customers expense (if any)
KW automotive North America, Inc.
300 W. Pontiac Way
Clovis, CA 93612
Tel: +1 559.875.0222
Fax: +1 559.876.2259